Presentation Box Tutorial Page 4

Now cut the sides. They should be of the same thinner material used for the bottom and top, and must be at least as tall as the combined bottom, box body and top. Their length should be as long as the top.

Here's a front view. If you have a belt or disk sander, it's alright if the sides are a bit taller than needed since you can sand all sides at the very last to bring everything into perfect fit. Glue the sides on, using accelerator on the outsides where you will sand, but not along the joint with the top of the box body - the white problem again.

	Display and Presentation Box Tutorial
Now cut the sides. They should be of the same thinner material used for the bottom and top, and must be at least as tall as the combined bottom, box body and top. Their length should be as long as the top. Here's a front view. If you have a belt or disk sander, it's alright if the sides are a bit taller than needed since you can sand all sides at the very last to bring everything into perfect fit. Glue the sides on, using accelerator on the outsides where you will sand, but not along the joint with the top of the box body - the white problem again.
Click Here to go to the NEXT PAGE